HTM-PBK press-block for round frames
Order
Ask a question
HTM-PBK press block is designed to seal a single cable or pipe.
Подробнее
Sealing the modules and sealing the cable in the press block is performed by tightening the front and rear steel covers with bolts.
Installation of the HTM-PBK press block:
The mounting frame is mounted in the prepared opening and fastened in an appropriate way (welding or bolting).
The press block is mounted in the installed and secured frame.
The sealing section of the press block is filled with transit modules with cables or pipes passing through them.
The bolts of the press block are tightened by turning them alternately in a crisscross pattern until the transit modules are fully sealed.
Installation of the HTM-PBK press block:
The mounting frame is mounted in the prepared opening and fastened in an appropriate way (welding or bolting).
The press block is mounted in the installed and secured frame.
The sealing section of the press block is filled with transit modules with cables or pipes passing through them.
The bolts of the press block are tightened by turning them alternately in a crisscross pattern until the transit modules are fully sealed.
Photogallery
8
