Round press-block HTM-PB70

Арт. HTM-PB70

Order

Ask a question

The press-blocks HTM-PBK70 are used for cables and pipes tightening with diameter from 3 to 34 mm. Designed for the round frames HTM70. The outer diameter of the press-block corresponds to the inner diameter of the sealing section of the frame.

Details

Need consultation?

Our technical specialists will be glad to help you

Ask a question

Functions:

sealing of modules and tightening of cables and pipes in the press-block by tightening the front and rear steel covers with bolts;
when used together with the frame, HTM-RMKR allows to seal an already laid cable.

Press-block HTM-PBK installation:

The mounting frame is mounted in the prepared opening and ﬁxed in the appropriate way (welding or bolting);
The press-block is mounted in the installed and ﬁxed frame;
The sealing section of the press-block is ﬁlled with transit modules with the cables or pipes passing through them;
The bolts of the press-block are tightened, turning them one by one in cross order until the transit modules are completely sealed.

Press-block HTM-PBK70. Applicable modules: НТМ20, НТМ30, НТМ40.

Back to list